Groove Design: Calculating Percentage Fill and Squeeze for O-Rings.
Groove Design: Calculating Percentage Fill and Squeeze for O-Rings
Problem Statement
Improper groove design leads to O-ring failure due to excessive squeeze or insufficient fill. This results in leakage, extrusion, or premature wear under high-pressure cycles.
Material Science Analysis
O-ring performance depends on material elasticity and chemical resistance. FKM excels in high-temperature and chemical environments due to its fluorine content. EPDM offers superior resistance to steam and ozone but fails in petroleum-based fluids. NBR provides excellent oil resistance but degrades at elevated temperatures.
Technical Specs
- FKM: Shore A Hardness 75, Tensile Strength 15 MPa, Elongation at Break 200%, Temperature Range -20°C to 200°C.
- EPDM: Shore A Hardness 70, Tensile Strength 12 MPa, Elongation at Break 300%, Temperature Range -40°C to 150°C.
- NBR: Shore A Hardness 70, Tensile Strength 10 MPa, Elongation at Break 250%, Temperature Range -30°C to 120°C.
| Material | Temperature Range (°C) | Compression Set (%) | Chemical Resistance |
|---|---|---|---|
| FKM | -20 to 200 | 15 | Excellent |
| EPDM | -40 to 150 | 20 | Good |
| NBR | -30 to 120 | 25 | Fair |
Standard Compliance
RubberQ adheres to IATF 16949 standards for batch-to-batch consistency. Our compounding process ensures precise control of polymer ratios, fillers, and curing agents. We comply with ASTM D2000 for material callouts and ISO 3601 for O-ring dimensional standards.
CTA
For custom material compound development or IATF 16949 documentation, consult RubberQ's engineering department.
